鐵藝大門定制設計需提供詳盡信息，涵蓋尺寸、風格、材質、功能等維度，以確保成品貼合需求，這些信息是設計合理性與實用性的基礎。

　　The customized design of wrought iron gates requires detailed information covering dimensions such as size, style, material, and function to ensure that the finished product meets the requirements. This information is the basis for the rationality and practicality of the design.

　　基礎尺寸數據是前提。明確門洞寬度（單扇 60-100cm，雙扇 120-300cm，車輛進出≥250cm）、高度（常規 180-220cm，庭院門可至 250cm），以及兩側墻體厚度（影響門框安裝）。說明地面狀況：是否鋪地磚（預留 5-10mm 間隙）、有無斜坡（＞5° 需做防刮處理），底部離地間隙（5-10cm 防積水）。電動大門需提供電機安裝空間（≥30cm×30cm）及電源接口位置（距地 120-150cm）。

　　Basic dimensional data is a prerequisite. Clearly define the width of the door opening (single leaf 60-100cm, double leaf 120-300cm, vehicle entry and exit ≥ 250cm), height (conventional 180-220cm, courtyard door can reach 250cm), and thickness of the walls on both sides (affecting door frame installation). Explain the ground condition: whether there are floor tiles (with a reserved gap of 5-10mm), whether there are slopes (with an angle greater than 5 °, anti scratch treatment is required), and the bottom clearance from the ground (5-10cm to prevent water accumulation). Electric doors require motor installation space (≥ 30cm × 30cm) and power interface location (120-150cm above the ground).

　　風格與裝飾需求決定外觀。確定整體風格：歐式用卷草紋等曲線紋樣；中式多采用回紋等對稱圖案；現代簡約以直線條為主，搭配幾何圖形。裝飾細節要具體：是否加花紋（3-5mm 厚，鍛打或激光切割）、有無雕刻（位置在中心或兩側，不超門面積 15%）、是否鑲嵌玻璃（鋼化或磨砂玻璃，尺寸與花格匹配）。色彩方面，明確底和面漆顏色（如 RAL9005 黑色），是否做舊及程度。

　　Style and decoration requirements determine the appearance. Determine overall style: European style with curved patterns such as rolled grass patterns; Chinese style often uses symmetrical patterns such as folds; Modern simplicity is mainly based on straight lines, paired with geometric shapes. The decorative details should be specific: whether to add patterns (3-5mm thick, forged or laser cut), whether there are carvings (located in the center or on both sides, not exceeding 15% of the door area), whether to embed glass (tempered or frosted glass, matching the size with the grid). In terms of color, clarify the color of the base and topcoat (such as RAL9005 black), whether it is worn out, and the degree.

　　材質與結構參數影響耐用性。主料材質：低碳鋼（2-5mm，性價比高）、花紋鋼板（適合常踩踏）、304 不銹鋼（耐腐，1.5-3mm，潮濕環境適用），防撞擊需增至 5-8mm。輔料花件選鑄鐵（低成本）或鍛鋼（高強度），連接用焊接（滿焊打磨）或防銹螺栓。門框選單框或雙框（雙框適合寬門洞），有無門柱（≥15cm×15cm）及頂部裝飾。

　　Material and structural parameters affect durability. Main material: Low carbon steel (2-5mm, high cost performance), patterned steel plate (suitable for frequent trampling), 304 stainless steel (corrosion-resistant, 1.5-3mm, suitable for humid environments), with impact resistance increased to 5-8mm. Auxiliary decorative parts are made of cast iron (low-cost) or forged steel (high-strength), and are connected by welding (full welding and polishing) or rust proof bolts. Door frame selection frame or double frame (double frame suitable for wide door openings), with or without door pillars (≥ 15cm × 15cm) and top decoration.

　　功能與使用需求要考量。開啟方式：平開門（預留擺動空間）、推拉門（說明軌道類型及承重）、電動感應門（感應范圍 1-3m）。鎖具類型：機械鎖（距地 90-110cm）、電子鎖（預留電源線），是否配門禁系統及聯動方式。特殊功能：是否帶通風窗（門上部分，占 20%-30% 面積）、兒童安全鎖（≤150cm）、保溫層（北方內側加 5-10mm 保溫棉）。

　　Functionality and usage requirements need to be considered. Opening method: swing door (with reserved swing space), sliding door (indicating track type and load-bearing capacity), electrically responsive door (sensing range 1-3m). Lock type: mechanical lock (90-110cm above ground), electronic lock (reserved power cord), whether equipped with access control system and linkage method. Special functions: equipped with ventilation windows (on the upper part of the door, accounting for 20% -30% of the area), child safety locks (≤ 150cm), and insulation layer (adding 5-10mm insulation cotton on the northern inner side).

　　安裝環境與附加要求不可忽視。說明氣候特點：多雨地區強調防銹（熱浸鋅，鋅層≥85μm），沿海用 316 不銹鋼耐鹽霧。周邊環境：靠近化工廠需防腐，強風環境門扉需加重或加防風撐。附加要求：是否與圍欄銜接（提供照片保風格統一）、有無特殊標識（提供矢量圖）、是否需安裝圖紙（含預埋件位置，≥10cm×10cm×10cm）。

　　The installation environment and additional requirements cannot be ignored. Climate characteristics: Rainy areas emphasize rust prevention (hot-dip galvanizing, zinc layer ≥ 85 μ m), while coastal areas use 316 stainless steel for salt spray resistance. Surrounding environment: Near the chemical plant, anti-corrosion measures are required. In strong wind environments, the doors should be reinforced or windproof supports should be added. Additional requirements: Whether it is connected to the fence (provide photos to ensure consistent style), whether there are special markings (provide vector drawings), and whether installation drawings are required (including the position of embedded parts, ≥ 10cm × 10cm × 10cm).

　　總之，提供的信息越具體，設計方案越貼合需求，能確保成品在美觀、耐用、實用等方面達預期效果。

　　In short, the more specific the information provided, the more tailored the design plan is to meet the needs, ensuring that the finished product achieves the expected results in terms of aesthetics, durability, and practicality.

　　本文由濟南鐵藝大門友情奉獻.更多有關的知識請點擊:http://www.coagfreight.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Light Steel Structure For more information, please click: http://www.coagfreight.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.