如今，在我國，鐵藝護欄已經進入了普通人的家中，為日子做了新的詮釋，注入了時代的內涵。歷史文化反映，精神與檔次融合。未來，更多高質量、高質量的鋼鐵產品和設計作品將在我國得到廣泛的使用和推廣。

Nowadays, in our country, iron guardrails have entered the homes of ordinary people, providing a new interpretation of life and injecting the essence of the times. Historical and cultural reflection, integration of spirit and level. In the future, more high-quality and high-quality steel products and design works will be widely used and promoted in China.

不得在已裝置的濟南鐵藝護欄上使用灰漿和包層。為了避免污染，在穿插操作過程中，鐵藝護欄應掩蓋保護膜。再一次，鐵柵欄被裝置清潔外表，修正劃痕，并保證外表光潔。

It is not allowed to use mortar and cladding on the installed Jinan iron guardrail. In order to avoid pollution, the iron guardrail should cover up the protective film during the interpenetration operation. Once again, the iron fence is installed to clean the surface, correct scratches, and ensure a smooth and clean appearance.

工人在裝置鐵藝護欄前，有必要了解安全、環保和文明施工教育;施工人員有必要嚴格執行現場安全生產規章制度。施工人員進入現場時應戴安全帽，焊接人員有必要穿好絕緣鞋。嚴格遵守操作規程和一切安全規章制度。

It is necessary for workers to understand safety, environmental protection, and civilized construction education before installing iron guardrails; It is necessary for construction personnel to strictly implement on-site safety production rules and regulations. Construction personnel should wear safety helmets when entering the site, and it is necessary for welding personnel to wear insulated shoes. Strictly abide by operating procedures and all safety regulations.

施工前，有必要進行安全技術披露，不得違反規定，并遵守安全人員的指揮。留意一切安全用具，并保證它們沒有被正確使用。施工現場的材料要堆積規整，日常施工中的殘片要進行整理和整理，以便完成現場的整理作業。

Before construction, it is necessary to disclose safety technology, not violate regulations, and follow the instructions of safety personnel. Pay attention to all safety equipment and ensure that they are not used correctly. The materials on the construction site should be stacked neatly, and the leftover fragments from daily construction should be sorted and organized in order to complete the on-site sorting operation.

設置施工區域和危險區域的警示標志，并采納防護措施。焊接時應特別留意，準備消防設備，焊接結束時應立即查看現場。要采納各種有用措施，削減施工過程中發生的噪音，保證施工過程不干擾人們。

Set up warning signs for construction areas and hazardous areas, and adopt protective measures. During welding, special attention should be paid and fire-fighting equipment should be prepared. Upon completion of welding, the site should be immediately inspected. Various useful measures should be taken to reduce the noise generated during the construction process and ensure that the construction process does not interfere with people.

為了保證鍍層與鐵制品外表之間良好的粘結力，在實施鍍層(電鍍)前，有必要盡可能去除鐵制品外表的氧化皮、爐渣、鐵銹痕跡、油脂、塵垢和水分。

In order to ensure good adhesion between the coating and the surface of iron products, it is necessary to remove as much oxide skin, slag, rust marks, grease, dust and moisture as possible from the surface of iron products before implementing the coating (electroplating).

否則簡單使鍍層起泡、開裂、起皺、脫落。所謂處理是指用機械或化學或電化學辦法在電鍍前消除鐵藝護欄的外表缺陷。更多相關事項就來我們網站http://www.coagfreight.com咨詢吧！

Otherwise, it will simply cause the coating to bubble, crack, wrinkle, and fall off. The so-called treatment refers to the use of mechanical, chemical, or electrochemical methods to eliminate the appearance defects of iron guardrails before electroplating. For more related matters, come to our website http://www.coagfreight.com Consult!