There are various types of iron doors. Different styles, solemn and luxurious. You can also choose the color you like. Some users will worry about rust on the surface, but there is no need to worry about it. Let's take a look at the door treatment process, and you will know that the door is durable and rusty:

　　一、清除過程中，多是清除焊渣鐵門焊接部位，一定要小心清除焊渣的各個焊接部位。先用平銼或扁鐵去打渣，然后用砂輪機和砂布去磨焊縫，使其光滑。飛濺到其他部位的焊渣要順勢清理干凈。

　　1、 In the removal process, the welding parts of the slag iron gate are mostly removed, and each welding part of the slag must be carefully removed. First use flat file or flat iron to make slag, and then use grinder and abrasive cloth to grind the weld to make it smooth. The welding slag splashed to other parts shall be cleaned along with the situation.

　　二. 在補強過程中，用膩子和固化劑(比例為50:1)涂上膩子，攪拌均勻，涂在焊接部位，處理焊縫缺陷。

　　2、 In the process of reinforcement, putty and curing agent (proportion: 50:1) shall be applied, stirred evenly, applied to the welding parts, and weld defects shall be handled.

　　三、上光過程中，上光膩子晾干后，用拋光機和砂布充分打磨門的各個部件，特別是涂抹膩子的部分更要打磨。

　　3、 In the polishing process, after the putty is dried, use a polishing machine and abrasive cloth to fully polish all parts of the door, especially the part coated with putty.

　　四、噴涂過程中，鐵藝門在噴漆前，用濕布充分擦拭門的各個部位，不能留下灰塵等。然后先給鐵藝門噴鐵銹漆，等干了再噴，等干了再噴，等干了漆膜后再噴三遍自己喜歡的漆，噴上清漆。注意應無泄漏區，也不能產生流動等缺陷。個別精細處可刷涂補漆。

　　4、 In the process of spraying, before spraying the iron door, wipe all parts of the door with a wet cloth, without leaving dust, etc. Then spray the rust paint on the iron door first, wait until it's dry, wait until it's dry, wait until the paint film is dry, then spray the paint you like three times, and finally spray the varnish. Pay attention that there should be no leakage area and flow defects. Touch up paint can be applied to some fine parts.

　　以上就是對濟南鐵藝大門表面處理技術的詳細介紹，想要了解更多請點擊官網http://www.coagfreight.com

　　The above is a detailed introduction to the surface treatment technology of Jinan iron gate. For more information, please click http://www.coagfreight.com